[China Glass Net] The film for the car is not as simple as it looks, especially the front and rear glass film. Let Xiaobian tell everyone about the front and rear blocking film skills of the car! SUZHOU WINTEX TEXTILE CO.,LTD. , https://www.szwintextextile.com
On the one hand, the car can improve the perfection of the car, on the other hand, it can extend the service life of the car and reduce unnecessary expenses. Therefore, the owners of the film are particularly attached to the film, they like to stick the appropriate car film according to the brand and style of their own vehicles, the car film is more intuitive, the more important body parts are the front and rear glass film.
First, measure the long width of the front and rear glass, and cut out the corresponding film.
Secondly, the glass is cleaned and can be sprayed with a suitable brightness coating, so that after the film is applied, it will have a more exciting effect.
The shaping of the film before the baking film bites the corners of the film, so that the side with the protective film is separated, the side of the protective film is facing upward, and the layer is evenly laid on the glass, and the excess is cut off (by the black side of the glass) standard). The film is equally divided from the upper and lower sides from the middle, and the bubbles of the two broad sides are equally divided together on the upper and lower sides, and the bubbles on the two wide sides are equally divided on the upper and lower sides. Use a scraper to scrape the water in the middle part, taking care not to scrape the bubbles to prevent the film from being scraped. The middle part is first wiped, the effect is to shape, so that the solar film does not move, and the bubble of the film is averaged to two. The long sides are separated, which is good for baking film.
In addition, the veneered car film is flattened in place, making it look more fit and well blended with the body. Of course, the edge of the film is more important. In order to present the film for a long time, everyone must pay attention.
In general, it takes 5-7 days for the car foil to be fixedly attached to the window. During this time, try not to lift the glass to avoid displacement of the fully bonded car foil. The newly attached car foil is prone to fog and the like, which is a normal phenomenon in the process of drying the solar film. Generally speaking, it is normal for one week to half a month or so. Just wait for it to disappear slowly. Never wipe it.
In order to prolong the service life of the solar film and ensure its transparency, the owner should also pay attention not to wipe the solar film with a sharp, hard tool. When washing a car, try to wipe the film surface with a soft cloth such as a wet towel. Avoid caring chemical solvents with your own car wash to avoid damage to the car foil.